What Irons Should I Buy Quiz
Questions: 16 · 10 minutes
1. How do you expect your iron set to support your next stage of improvement?
Provide maximum assistance while I build repeatable contact from the ground up.
Remain forgiving enough for ordinary misses while still feeling suitable as my consistency improves.
Reward advanced strike control and shot shaping with minimal built-in correction.
Offer a more compact presentation while helping me generate modern distance.
2. During a typical round, what best describes your contact with a 7-iron?
I usually find the center and notice even small differences in strike location.
I have a few slight toe or thin strikes, but they rarely define the round.
My contact moves around the face, and several shots lose noticeable height or distance.
Center contact is still developing, so I want the clubhead to preserve as much launch and distance as possible.
3. Which iron profile best matches what you want to see at address?
A large head with a wide sole and noticeable offset.
A medium-size head with visible forgiveness and a reassuring topline.
A compact cavity-back with limited offset and some perimeter support.
A very compact shape with a thin topline, narrow sole, and minimal visual correction.
4. What is the main compromise you want your next irons to solve?
I want maximum forgiveness and launch, and compact looks are secondary.
I want compact looks and precise feedback, with little emphasis on added distance.
I want a sleeker head that still helps produce ball speed and useful carry.
I want a conventional forgiving shape without making distance technology the main feature.
5. Your longer irons often launch too low. What kind of help would you want from a new set?
Very little—I would rather control launch through my swing and club selection.
A modest launch boost without making the head look substantially larger.
Clear launch assistance and extra stability, even if the head is visibly forgiving.
The easiest possible launch, with a low center of gravity and substantial help on imperfect contact.
6. Imagine two 7-irons perform similarly in a demo. Which design balance would you choose?
The largest and easiest-launching head, even with substantial offset.
A medium-size head with clear perimeter weighting, moderate offset, and a familiar shape.
A compact head that prioritizes feedback and workability over mishit protection.
A compact-looking head that emphasizes ball speed more than traditional feedback.
7. Which pattern most closely matches your iron play right now?
I need the largest possible margin for inconsistent contact and difficulty getting the ball airborne.
I strike the ball consistently and mainly want precise feedback and trajectory control.
My contact is reasonably functional but common misses still cost enough distance to justify noticeable forgiveness.
I strike it fairly well and want speed technology in a somewhat smaller package.
8. You miss the center slightly on a par-3 tee shot. What performance would matter most?
Keeping a useful amount of launch and carry without making the club feel oversized.
Receiving very precise feedback about the miss, even if the shot loses more distance.
Getting the maximum possible protection from the miss, regardless of head size.
Retaining strong ball speed in a sleeker head, even with somewhat less directional help.
9. What information do you want to feel through the club after impact?
Minimal harshness; I mainly want the result protected when contact is imperfect.
A general sense of whether the strike was solid without emphasizing every small variation.
Clear feedback that distinguishes center contact from common misses.
Detailed feedback about strike location and turf interaction, even when it exposes a poor swing.
10. On soft turf, how often does the club dig or produce a heavy strike?
Rarely; I control the low point well and prefer a narrower sole through the turf.
Occasionally; moderate sole width would provide enough help.
It varies with the lie, so I would welcome a clearly forgiving sole without choosing the widest option.
Frequently enough that a very wide, stable sole is a major buying priority.
11. Which outcome from a well-struck mid-iron would satisfy you most?
Maximum height and stability, even if the head is visibly large.
A penetrating, controllable flight with detailed feedback rather than extra speed.
Strong carry from a streamlined head, provided the shot still launches and stops predictably.
Dependable launch and direction from a conventional forgiving cavity-back.
12. When you set an iron behind the ball, which appearance inspires the most confidence?
A compact head with a thin topline and minimal offset.
A medium-size head that looks streamlined but not intimidating.
A generously sized head with visible perimeter weighting.
A large profile, wide sole, and noticeable offset that make the hitting area feel substantial.
13. Facing a tucked pin, how do you prefer to approach the shot?
I usually aim for the safer part of the green and want the club to reduce the penalty from a mishit.
I choose a stock shot but appreciate enough feedback to understand the strike.
I sometimes alter trajectory or curve when the situation clearly rewards it.
I regularly select a specific flight, shape, and landing window and want the iron to respond precisely.
14. You like the look of better-player irons but do not want every slight miss to lose substantial distance. Which response fits?
That is exactly my concern; I want moderate forgiveness and speed hidden in a compact profile.
I would rather see obvious forgiveness at address than preserve the compact profile.
Distance loss is acceptable because pure feedback and workability matter more to me.
I would choose a medium-size game-improvement head rather than prioritize either extreme.
15. In a fitting, your compact favorite feels excellent but carries shorter than you need. What would you try next?
A compact-looking hollow or speed-focused model that may recover carry without becoming oversized.
A traditional compact model with similar feedback, accepting the shorter carry.
A substantially larger, highest-launching head with maximum stability.
A standard game-improvement model with moderate size and balanced forgiveness.
16. During a range session, how consistent is your strike pattern with a 7-iron?
It is widely scattered, so preserving launch and distance is my main concern.
It is improving, but thin and toe-side contact still appears regularly.
It is fairly compact, with occasional misses that I can usually identify.
It is reliably centered enough that I focus more on start line, trajectory, and carry windows.