PPE Quiz
Questions: 16 · 10 minutes
1. When reusable PPE is shared between workers, what practice is most appropriate?
Store it immediately after use so adjustments remain unchanged
Share only equipment that has visible dirt, because clean equipment may hide damage
Clean, inspect, and sanitize it as appropriate before another person uses it
Avoid readjusting it because PPE is designed to fit all users identically
2. Before a worker uses a tight-fitting respirator for required protection, which step is essential?
Choosing whichever model feels lightest during a brief trial
Completing required fit testing and performing a user seal check each time it is worn
Using another worker's respirator if it appears to be the right size
Wearing it over facial hair to cushion the face seal
3. Why should a worker not rely only on smell to decide when an air-purifying respirator cartridge needs replacement?
Smell indicates only whether the respirator straps are tight enough
All hazardous airborne substances are completely odorless
Cartridges remain effective until breathing becomes physically impossible
Odor may not provide a reliable warning, so an established change schedule or approved service-life indicator should be followed
4. A worker is preparing to weld. Which eye and face protection approach is appropriate?
A suitable welding helmet with the correct filter shade, plus any required underlying eye protection
Dark fashion sunglasses combined with a clear face shield
A general-purpose face shield with no rated filter lens
Clear safety glasses alone because the welding arc is visible without magnification
5. Which finding during a hard-hat inspection most clearly calls for action before use?
A removable manufacturer's label remains legible inside the shell
The shell is cracked or the suspension is damaged
The suspension has been adjusted to fit the wearer
The hat is a different color from another work team's hats
6. A worker is cutting material that may send small particles toward the eyes. Which protection is most directly suited to this hazard?
A face shield worn without safety eyewear
Properly fitted safety glasses with suitable side protection
A filtering facepiece respirator
Chemical-resistant gloves
7. Before using a personal fall-arrest harness, what should the wearer do?
Attach it to any nearby pipe as long as the connection is above waist level
Loosen every strap to maximize movement during a fall
Inspect the system, confirm proper fit and connections, and use an approved anchorage under the required fall-protection plan
Use the harness without inspection if it was inspected at the time of purchase
8. There is a risk of a corrosive liquid splashing toward a worker's face. What is generally the most appropriate PPE approach, subject to the hazard assessment?
Chemical splash goggles, with a compatible face shield when added face protection is needed
A face shield alone because it covers more of the face
Ordinary prescription glasses because they cover the eyes
Safety glasses with no side protection because they are easier to remove
9. After handling a contaminating substance, how should a worker generally remove disposable gloves?
Remove one glove with the teeth so the other hand remains covered
Pull both gloves off by gripping their contaminated fingertips with bare hands
Wash the gloved hands and keep the gloves for repeated use regardless of their design
Peel them off without touching the contaminated exterior with bare skin, then perform appropriate hand hygiene
10. A crew is working near moving vehicles in poor visibility. Which statement best describes the role of high-visibility clothing?
It physically prevents a vehicle from striking the wearer
It can improve wearer visibility when suitably selected, but it must be used with necessary traffic controls and safe procedures
It makes traffic controls and separation from vehicles unnecessary
It provides adequate protection only when worn beneath a dark outer jacket
11. A worker needs safety glasses, earmuffs, and a respirator for one task. What is the key PPE compatibility concern?
The items must work together without disrupting seals, fit, coverage, or protective performance
The least comfortable item should be removed once work begins
All items should come from the same manufacturer even if they interfere with one another
Each item is effective independently, so interactions do not need to be assessed
12. A worker's earmuffs sit partly over the arms of bulky safety glasses, leaving gaps around the cushions. What should happen?
Increase music volume inside the earmuffs to mask workplace noise
Remove the safety glasses whenever noise levels are highest
Keep the setup because small seal gaps do not affect hearing protection
Adjust or replace the equipment so both eye protection and an effective earmuff seal are maintained
13. A task involves handling a solvent. How should the worker choose suitable protective gloves?
Select gloves by color because standardized colors indicate chemical resistance
Choose the thickest available glove regardless of its material
Use any disposable glove because all polymers resist solvents similarly
Check the chemical, exposure conditions, safety data, and glove manufacturer's compatibility information
14. Which topic belongs in effective PPE training?
Only the location where unused PPE is stored
Only the penalties for forgetting to wear PPE
When PPE is needed, what its limitations are, and how to wear, inspect, maintain, and dispose of it properly
The brand names of every PPE product available for purchase
15. What is the primary role of personal protective equipment in workplace safety?
To reduce exposure to hazards that remain after other controls are considered or applied
To eliminate the hazard at its source so no other controls are needed
To replace employee training and safe work procedures
To make hazardous work acceptable whenever safer methods cost more
16. A worker discovers a deep cut in a reusable protective glove just before starting a hazardous task. What is the best response?
Cover the cut with ordinary tape and use the glove for one more task
Wear the damaged glove under a larger glove without checking compatibility
Remove it from service and obtain suitable undamaged protection
Continue using it if the cut is on the back of the hand